• Case IH
  • New Holland
  • Kubota
  • Claas
  • Kioti
Find Lamb & Webster on facebook Follow Lamb & Webster on twitter Watch Lamb & Webster on youtube

Claas LINER 3100

Double tap to zoom



The alternative to a four-rotor rake.

The LINER 3100 can be used wherever a high work rate is required. With a working width of 28.5 to 33 ft (8.7 to 10 m), it can be flexibly used in both silage and hay. In straw, it is effectively able to combine two swaths of a 25 ft (7.5 m) cutterbar.

  • Continuously lubricated CLAAS professional rotor housing assembly with additional bearing housing.
  • The working width is hydraulically adjustable to anywhere from 28.5 to 33 ft (8.7 to 10 m), readable from a scale.
  • Fourteen removable tine arms with five dual tines and PROFIX quick-change system.


High-quality forage guaranteed.

  • 3D ground-contour following, thanks to cardan suspension on rotors and six-wheel chassis as standard.
  • Lifting of the rotors parallel to the ground prevents the rotors from catching on the ground.


Also manages dense windrows.

With a lift height of up to 3 ft (90 cm), the LINER 3100 can drive effortlessly over even the largest straw windrows without tearing up the straw. It can be adapted to all harvesting conditions via infinitely variable headland stops. At headlands, the swath guard automatically folds upwards, giving maximum clearance for high swaths. Wheel weights fitted as standard ensure stability on slopes or when lifting rotors. Every rotor is protected against overloading.

Time-saving on the road.

For a transport height of less than 13 ft (4 m), three tine arms are removed from each rotor and secured in the appropriate holder right next to the rotor, saving time. (Single-rotor lifting is controlled via a three-way valve.) The chassis, with its large-volume tires and active steering, enables road speeds of up to 31 mph (50 km/h) to be reached. Warning signs and lighting are fitted as standard for safety while on the road.

Convenient options.

  • Electro-hydraulic single-rotor lifting function and hydraulic raking height adjustment – two convenient options with no need for ropes, operated via the CLAAS STANDARD TERMINAL.
  • Single-rotor lifting, controlled via a three-way valve.


Liner 3100
Mounting type 2-pt trailed
Mounting category Cat. II
Working width ft 28'7" - 32'10"
Windrow width ft, approx 4'11" - 8'6"
Number of rotors 2
Rotor diameter ft 13'9"
Tine arms per rotor set 14
Dual tines per arm set 5
Tine diameter mm 9.5
PROFIX tine arm bracket
Windrow laying position Center Center
PTO shaft speed rpm 540
Hydraulic spool valves 1 x da + 1 x sa
● Standard ○ Optional – Not Available