Mergers
Click any image to enlarge.
-
M-9 MERGER
FEATURES/OPTIONS
- The M9 merger features a 9' pick-up head with independent head flotation.
- The 42" cross conveyor allows for hi-capacity of crop discharge.
- All H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.
- Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.
- The pick-up head crop roller is adjustable for height and tension.
- Cross conveyor speeds up when pickup speed is increased.
- By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.
- Storage for the inverter shield is out of the way behind the machine.
- The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.
- The pick-up head crop roller is adjustable for height and tension.
- Taillights are standard equipment.
- An optional self-contained hydraulic drive kit with PTO pump can be installed on the M9 Merger. This feature allows tractors with a minimum 5 g.p.m. hydraulic capacity and 1 remote to operate the merger.
- An optional 2' extension or accelerator roller (patented) fluffs windrows. Both options allow you to merge up to 14' cuts of hay windrowed up to 9'.
-
HSM9 & HSM12 HYDRA-SWING MERGERS
FEATURES/OPTIONS
- H&S Hydra-Swing Mergers distribute material smoothly and evenly without bunching. Save time and money by combining 2 or 3 windrows from 9' to 18' cuts.
- With the Hydra-Swing style tongue, the merger can be pulled directly behind the tractor or swung out to the right to fit your operation.
- Hydraulically folding the optional 2', 4', or 6' extension out of the way, and turning the hydraulic valve to the off position, the Hydra-Swing Merger's unique design can also be used for merging small mower conditioner windrow applications.
- A tractor mounted electric control box directs hydraulic oil flow to swing the tongue or raise and lower the pickup on the Hydra-Swing Mergers.
- An optional self-contained hydraulic drive kit with P.T.O. pump is available. This feature allows tractors with a minimum 5 G.P.M. hydraulic capacity and 1 remote to operate the merger.
- A heavy duty 42" wide, ribbed cross conveyor easily accommodates the massive flow of material. A cross conveyor shut-off is optional on all Hydra-Swing Mergers.
- Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.
- The gauge wheels and crop roller are easily set to crop conditions just by removing and replacing the pins in the desired setting.
- The pick-up head crop roller is adjustable for height and tension.
- Both models feature independent head flotation and a 42" cross conveyor belt for hi-capacity.
- The cross conveyor speeds up when the pickup speed is increased.
- The right hand side merges, and with the optional inverter shield, the left hand side inverts.
- Transport lights are standard equipment.
-
TRI-FLEX TRIPLE HEAD MERGERS
FEATURES/OPTIONS
- Available in 30' & 35' Models.
- Cab Mounted Control Box.
- Rotary Steering Sensor.
- The self-contained hydraulic system has an 75 gallon reservoir.
- Either 1-3/8" or 1-3/4" 1000 rpm PTO runs the 3 – Low volume 7 GPM Pumps w/ High Torque Motors pumps that drive the 3 heads.
- 3-point hitch is CAT 2, CAT3/N, or CAT3.
- The 3 heads on both 30' and 35' Tri-Flex Merger are divided into equal lengths.
- An Auto Lube System greases 80% of the Tri-Flex Merger.
- All heads are approximately 31" in diameter with an 8" drop to the cross conveyor.
- The Tri-Flex features a heavy duty steerable axle. When the Tri-Flex Merger is folded into transport position, the steering system is locked out for transport.
- The center cam and center drive (patent pending) system runs at 80 rpm's for an even flow of material.
- Hydraulic motors on the ends of each fluted roll, drive the 42" wide rubber w/nylon cord cross conveyor belt. A guide groove keeps the belt aligned.
- The 6 tine bars have graphite impregnated nylon split bearings and feature U-shaped rubber teeth.
- The elliptical shaped skid shoes are hydraulically adjusted from the electric control box.
- Tire options include 16.5 x 16.1 or BKT AW711.